Bathrooms
Bathroom vanity tops
Calder makes custom bathroom countertops and vanity tops in Henderson. The same crew that cuts our kitchen work fabricates and installs them. A vanity is a smaller piece of stone than a kitchen counter, but it takes daily wear of its own from standing water, makeup and hair products, and curling irons set down hot.
Materials
Bathroom countertop materials
A vanity gets less heat than a kitchen counter but more standing water, and more contact with cosmetics, which stain differently from food. The best bathroom countertops come from the same short list of materials as a kitchen. The difference is how often natural stone needs sealing.
Quartz is the low-maintenance choice for a vanity top. It never needs sealing, resists the acids in skincare and haircare products, and wipes clean. Read more about quartz.
Quartzite and granite also work well in a bathroom. Both need periodic sealing to hold up against standing water around the sink. Quartzite is the harder of the two, and it looks closer to marble if that’s the look you want. Read more about quartzite. Read more about granite.
Caesarstone and Cambria warranties work the same way on a bathroom vanity as in a kitchen. Both require certified installation, and Calder is certified for both brands, so the manufacturer warranty stays intact. Read more about Caesarstone. Read more about Cambria.
Even in Las Vegas, a bathroom with a shower nearby is more humid than the rest of the house, which affects how well sealed natural stone needs to be. Granite and quartzite around a sink get standing water and splashed product several times a day, so we reseal them on a shorter schedule in a bathroom than in a kitchen. Quartz avoids the issue, since it never needs sealing however humid the room gets.
Design
Vanity backsplash and edge
Most vanity tops have a short backsplash where the counter meets the wall, usually a few inches tall. We cut it from the same slab as the top, so there’s no seam or color break at the wall. You can also run a full-height backsplash up to the mirror or the ceiling, which looks like a kitchen’s full-height backsplash on a smaller wall.
Edge profile matters here too, though a vanity top usually suits a simpler edge than a kitchen island. Most people choose an eased or bullnose edge. It’s comfortable to lean against at the sink, and it doesn’t compete with the mirror, faucet and hardware in a small room.
Layout
Undermount sinks, double vanities and matching slabs
An undermount sink cutout has to be exact. The sink sits below the stone with no rim to hide a rough edge, so we measure and cut the opening to the sink’s actual dimensions. We confirm the sink model before cutting, so the opening fits the bowl precisely.
A double vanity raises a sizing question. The two sinks need even spacing, on either one continuous slab or two matched pieces with a planned seam between them. We lay this out before cutting, so the spacing looks intentional and both sink openings sit level with each other.
If you’re matching your bathroom to the stone in a kitchen or another room, or matching two bathrooms in the same house, we can pull from the same slab or the same lot so the veining stays consistent from room to room. This only works when the stone is selected together, so it helps to mention it early, before either room is fabricated.
The shop
From the same shop as your kitchen
The sink cutouts and edge work on a vanity leave less room for error than a long kitchen run, because there’s no backsplash or cabinet line to hide a mismeasurement. The same crew that laser-measures and cuts our kitchen work handles every vanity top on the same five-axis bridge saw. Nothing is handed off to a separate fabricator, and you get daily updates and photo reports throughout the project. Learn more about the fabrication shop and our process.
Bring to your quote
- Rough width and depth of the vanity, or the cabinet dimensions if it’s new
- Single or double sink, and the sink model if you already have one
- Material preference, or “not sure yet”
- Photos of the existing vanity or cabinet plans
Start my quote takes about two minutes, with no obligation. We prepare your formal quote from what you tell us.
Answers
Vanity top questions
- Who makes custom bathroom vanity tops in Henderson?
- Calder fabricates and installs custom bathroom vanity tops in our own Henderson shop, in quartz, quartzite, granite, and the certified brands Caesarstone and Cambria. We measure every vanity top on site with a laser and cut it on our five-axis bridge saw, and the crew that cut it installs it.
- What’s the best material for a bathroom vanity top?
- Quartz is the lowest-maintenance choice for a bathroom vanity, because it never needs sealing and resists the acids in cosmetics and haircare products. Granite and quartzite also perform well and hold up to standing water and humidity, but in a bathroom they need resealing more often than in a kitchen. Caesarstone and Cambria are certified quartz options with a manufacturer warranty behind the installation.
- Can I get an undermount sink in my vanity top?
- Yes. We confirm your sink’s exact model and dimensions before cutting, so the undermount opening fits the bowl precisely and no rim is needed to hide a rough edge. It helps to choose the sink early, because we cut the opening to match that sink rather than a generic template.
- Can you build a matching double vanity top?
- Yes. Before cutting, we lay out the sink spacing, and the seam placement if there is one, so both sinks sit level and evenly spaced. Whether the top is one continuous slab or two matched pieces with a planned seam depends on the vanity’s total width and the slab sizes available.
- Can my bathroom vanity match the stone in my kitchen or another bathroom?
- Often, yes, as long as the stone for both rooms is selected at the same time. Pulling from the same slab or lot keeps the veining consistent from one room to the next. Mention it when you request your quote, and we’ll plan the material selection around it from the start.
Specifying for a client? Visit our trade page.